Kmaiti

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg

Saturday, 7 August 2010

Install ffmpeg mplayer flvtool2 yamdi x264 theora mp3lame vorbis ogg faac

Posted on 21:09 by Unknown
Guys,

Here are the steps those I followed :

=======
This is a tutorial to enable video sharing support on Centos servers.
This should install ffmpeg, mplayer, mencoder, flvtool2, yamdi, x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid . These tools will enable on your server:
video conversion
thumbnail generation
FLV meta injection (flvtool2, yamdi)
extra codecs (x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid)
This is functional and we update it each time we configure a new server.
Installation is done using the “root” account.
Attention: If you copy and paste commands below, make sure “-” are not converted to “.”. If these get converted, edit “.” back to “-”. Some options use 2 * “-”.
GIT
(required to get X264)
yum install curl-devel expat-devel gettext-devel openssl-devel zlib-devel
cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-1.6.0.4.tar.gz
tar -zxvf git-1.6.0.4.tar.gz
cd git-1.6.0.4
make prefix=/usr/local all
make prefix=/usr/local/ install
git –version
And git manpages:
cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-manpages-1.6.0.4.tar.gz
cd /usr/local/share/man
tar -zxvf /usr/local/src/git-manpages-1.6.0.4.tar.gz
YASM
YASM is a modular assembler, it is required by the x264 package.
cd /usr/local/src/
wget http://www.tortall.net/projects/yasm/releases/yasm-0.7.0.tar.gz
tar zfvx yasm-0.7.0.tar.gz
cd yasm-0.7.0
./configure
make && make install
cd ..
X264

cd /usr/local/src/
git clone git://git.videolan.org/x264.git
cd /usr/local/src/x264
./configure –enable-shared –prefix=/usr
make && make install
Essential Codecs
cd /usr/local/src/
wget www3.mplayerhq.hu/MPlayer/releases/codecs/essential-20061022.tar.bz2
tar jxvf essential-20061022.tar.bz2
mkdir /usr/local/lib/codecs/
mv /usr/local/src/essential-20061022/* /usr/local/lib/codecs/
chmod -R 755 /usr/local/lib/codecs/
LAME
cd /usr/local/src/
wget easynews.dl.sourceforge.net/sourceforge/lame/lame-3.97.tar.gz
tar zxvf lame-3.97.tar.gz
cd /usr/local/src/lame-3.97
./configure
make && make install
OGG
cd /usr/local/src/
wget downloads.xiph.org/releases/ogg/libogg-1.1.3.tar.gz
tar zxvf libogg-1.1.3.tar.gz
cd /usr/local/src/libogg-1.1.3
./configure –enable-shared && make && make install
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
export PKG_CONFIG_PATH
VORBIS
cd /usr/local/src/
wget downloads.xiph.org/releases/vorbis/libvorbis-1.1.2.tar.gz
tar zxvf libvorbis-1.1.2.tar.gz
cd /usr/local/src/libvorbis-1.1.2
./configure && make && make install
Theora
cd /usr/local/src/
wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2
tar jxvf libtheora-1.1.1.tar.bz2
cd /usr/local/src/libtheora-1.1.1
./configure –prefix=/usr
make && make install
FAAC
cd /usr/local/src/
wget http://downloads.sourceforge.net/faac/faac-1.28.tar.gz
tar zxvf faac-1.28.tar.gz
cd /usr/local/src/faac-1.28
./configure –prefix=/usr
make && make install
FAAD2
cd /usr/local/src/
wget http://downloads.sourceforge.net/faac/faad2-2.6.1.tar.gz
tar zxf faad2-2.6.1.tar.gz
cd faad2
autoreconf -vif
./configure –disable-drm –disable-mpeg4ip
make && make install
Xvid
cd /usr/local/src/
wget http://downloads.xvid.org/downloads/xvidcore-1.2.1.tar.gz
tar zxfv xvidcore-1.2.1.tar.gz
cd xvidcore/build/generic
./configure
make && make install
Before installing ffmpeg, setup some linking for scripts that look in certain locations for codecs:
ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so.0.3.10
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so.80
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so
FFMPEG (download latest from SVN)
cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
cd /usr/local/src/ffmpeg/
./configure –enable-gpl –enable-shared –enable-nonfree –enable-libmp3lame –enable-libvorbis –enable-libxvid –enable-libx264 –enable-libtheora –enable-libfaac –enable-libfaad
make && make install
export LD_LIBRARY_PATH=/usr/local/lib/
FFMPEG configure options use 2 x “-”.
MPLAYER
cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer
cd /usr/local/src/mplayer
svn update
cd /usr/local/src/mplayer
./configure && make && make install
cd ..
FLVTOOL2
First install Ruby from WHM.
cd /usr/local/src/
wget rubyforge.org/frs/download.php/9225/flvtool2_1.0.5_rc6.tgz
tar zxvf flvtool2_1.0.5_rc6.tgz
cd /usr/local/src/flvtool2_1.0.5_rc6/
ruby setup.rb config
ruby setup.rb setup
ruby setup.rb install
YAMDI
cd /usr/local/src/
wget http://downloads.sourceforge.net/project/yamdi/yamdi/1.4/yamdi-1.4.tar.gz?use_mirror=ufpr
tar zxf yamdi-1.4.tar.gz
cd yamdi-1.4
gcc yamdi.c -o yamdi -O2 -Wall
mv yamdi /usr/bin/
yamdi -h
=======
INSTALLATION RESULTS
mencoder: /usr/local/bin/mencoder
mplayer: /usr/local/bin/mplayer
yamdi: /usr/bin/yamdi
Add these shortcuts to /usr/bin if you need these there by default:
mencoder to /usr/local/bin/mencoder
mplayer to /usr/local/bin/mplayer
========

try :)
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Posted in | No comments
Newer Post Older Post Home

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Popular Posts

  • unable connect to socket: No route to host (113)
    Guys, This error message usually comes when you try to access remote linux desktop using vncviewer. Please check the firewall in the linux s...
  • NDMP communication failure error
    Guys, Issue : Netbackup server sends alert NDMP communication failure once everyday. But there is no issue to run scheduled backup jobs. Env...
  • what does it mean by "cman expected_votes="1" two_node="1" in cluster.conf ?
    For two node clusters ordinarily, the loss of quorum after one out of two nodes fails will prevent the remaining node from continuing (if bo...
  • How to make bridge over VLAN?
    How to make bridge over VLAN? Bridging over VLAN's : By constructing a bridge between a "normal" and a "VLAN" ethern...
  • How to verify UDP packet communication between two linux system?
    Guys, Today, I had to check UDP packet communication between linux and a windows system. Main purpose of the windows system was to capturing...
  • How to install pdo_mysql module with php on 64 bit linux machine?
    Guys, The PHP Data Objects (PDO) extension defines a lightweight, consistent interface for accessing databases in PHP. Each database driver ...
  • configure: error: C preprocessor "/lib/cpp" fails sanity check + Resolved
    Guys, I got that error messages when I was going to configure any software on the linux server. I was unable to execute easyapache or ./conf...
  • configure: error: could not find library containing RSA_new
    Guys, It seems you have enabled the SSL option during configuring the package. Please either resolve that dependency or disable the SSL opti...
  • Cannot find config.m4 + phpize +Resolved
    Guys, I got the same error messages and sorted out it. Here is the error that I got. ===== root@server [/home/cpeasyapache/src/php-5.2.9/ext...
  • How to redirect output of script to a file(Need to save log in a file and file should be menioned in the script itself?
    Expectation : @subject Steps : 1. Create a bash script. 2. add line : exec > >(tee /var/log/my_logfile.txt) That's it. All output ...

Categories

  • ACL
  • ESX
  • Linux
  • Storage
  • UCS

Blog Archive

  • ►  2013 (5)
    • ►  May (1)
    • ►  April (3)
    • ►  February (1)
  • ►  2012 (10)
    • ►  July (1)
    • ►  June (1)
    • ►  April (1)
    • ►  March (3)
    • ►  February (3)
    • ►  January (1)
  • ►  2011 (86)
    • ►  December (3)
    • ►  November (2)
    • ►  September (19)
    • ►  August (9)
    • ►  July (5)
    • ►  June (9)
    • ►  May (12)
    • ►  April (3)
    • ►  March (4)
    • ►  February (5)
    • ►  January (15)
  • ▼  2010 (152)
    • ►  December (9)
    • ►  November (34)
    • ►  October (20)
    • ►  September (14)
    • ▼  August (24)
      • How to enable iptables modules on linux?
      • iptables: Unknown error + Resolved
      • How to migrate VPS container to another virtuozoo ...
      • umount: /tmp: device is busy + Resolved
      • Cannot find config.m4 + phpize +Resolved
      • How to install mssql php extension on linux or cpa...
      • configure: error: C preprocessor "/lib/cpp" fails ...
      • How to add or load shared library on linux ?
      • How to install uploadprogress php extension on lin...
      • How to change php handler from backend on cpanel s...
      • How to recursively copy files from one server to a...
      • How to install svn (Subversion) on linux machine?
      • How to create logical volume or LVM on linux mach...
      • Lite speed webserver + Connection was reset ?
      • How does Red5 work + How red5 works ?
      • How to install apache ant on linux server?
      • How to install php eaccelerator on 64 bit linux se...
      • Install ffmpeg mplayer flvtool2 yamdi x264 theora ...
      • How to convert mp4 file to flv file on linux machi...
      • How to install pdo_mysql module with php on 64 bit...
      • Why clipbucket or ffmpeg is unable convert video f...
      • How to limit CPU ususage for a process?
      • How to install Mp4Box on 64 bit linux machine ?
      • How to partition a linux drive or raw disk?
    • ►  July (19)
    • ►  June (3)
    • ►  May (25)
    • ►  April (3)
    • ►  January (1)
Powered by Blogger.